Search results
Concentric and Eccentric Reducers - ANSI B16.9. Dimensions quoted in mm are ‘Nominal’ values from B16.9 (i.e. rounded equivalents of the inch dimensions). Refer to B16.9 for additional ‘Max’ and ‘Min’ metric dimensions. For tolerances see page 6-2.
Dimensions of concentric & cccentric reducers - ASME B16.9 NPS DN Outside Diameter at Bevel End-to- End, H Large End Small End 4 × 2 100 × 50 114.3 60.3 102 4 × 1 ½ 100 × 40 114.3 48.3 102 5 × 4 125 × 100 141.3 114.3 127 5 × 3 ½ 125 × 90 141.3 101.6 127 5 × 3 125 × 80 141.3 88.9 127 5 × 2 ½ 125 × 40 141.3 73 127
Concentric Pipe Reducer and Eccentric Pipe Reducer Dimensions are covered in ASME B16.9. Refer to the table given below for the size 1/2″ to 24″. NOMINAL PIPE SIZE
Dimensional tolerances are in millimeters unless otherwise indicated and are equal ± except as noted. Note: MSS SP-43 only covers stainless steel buttweld fittings made for use with Schedule 5S and 10S pipe and Stub Ends suitable for use with. Schedule 40S pipe, as defined in ASME B36.19M.
The dimensions and dimensional tolerances defined in MSS SP-43 are substantially the same as those in ASME B16.9 specifications from NPS 1/2 up to NPS 24. Except with regard to the outside diameter at the bevel.
Concentric & Eccentric Reducers – Standard Weight (Continued) Nominal Pipe Size Length (H) Large End Small End Approximate Weight (in Pounds) Outside Diameter Inside Diameter Wall Thickness Outside Diameter Inside Diameter Wall Thickness 4 X 1 4 4.500 4.026 0.237 1.315 1.049 0.133 2.8
Concentric and Eccentric Reducer ANSI B16.9 / MSS SP-75 (in mm) * Wellgrow’s standard. Nominal Pipe Size (NPS) Outside Diameter at Bevel End-to-end Nominal Pipe Size (NPS) Outside Diameter at Bevel End-to-end Large End Small End Large End Small End 26 x 24 660.4 609.6 609.6 40 x 38 1016.0 965.0 609.6 26 x 22 558.8 40 x 36 914.0
4 * 1 1/2 114.3 48.3 102 0.68 1.6 1.6 2.27 2For more information please visit: https://www.octalpipef. Butt Weld Eccentric Reducer Dimensions and Weight. Nomianl Pipe Size (NPS) Outside Diameter at Bevel. End-to-End, H. Weight (kg) Nomianl Pipe Size (NPS) End-to-End, H.
The document provides specifications for butt weld concentric reducers including nominal pipe sizes, dimensions at large and small ends, end-to-end lengths, and weights in kilograms for various pipe schedules. It lists reducer sizes from 3/4 inch to 30 inch nominal pipe size.
Dimensions of reducing tees and crosses - ASME B16.9 NPS DN OD, D OD, D1 Center to End Run, C Outlet, M [Notes(1)] 26 × 22 650 × 550 660 559 495 470 26 × 20 650 × 500 660 508 495 457 26 × 18 650 × 450 660 457 495 444 26 × 16 650 × 400 660 406.4 495 432 26 × 14 650 × 350 660 355.6 495 432 26 × 12 650 × 300 660 323.8 495 422
