Search results
As a part of this initiative, a virtual laboratory for Basic Electronics has been developed. The objective of this lab is to perform experiments in the Basic Electronics labs virtually, and yet have close to real life experience.
The Digital Electronic Circuits Virtual Laboratory is an initiative of Ministry of Human Resource Development (MHRD), Govt. of India, under the National Mission on Education through Information and Communication Technology (NME-ICT).
The objective of this lab is to perform experiments in the Analog Electronics labs virtually, and yet have close to real life experience. The platform is focused on learning aspects as much as on performing the experiments.
In this laboratory, students will get to explore and learn various concepts regarding analog electrical signals, networks and measurement of various electrical components.
Virtual Lab is an initiative of Ministry of Human Resource and Development(MHRD) under National Mission of Education through ICT to provide an interactive environment over the internet for creating and conducting different laboratory experiments by sharing the costly equipments and the resources.
q is the electronic charge = 1.6x10 −19 joules/volt (Coulombs), T is the absolute temperature in °Kelvin (°K = 273 + temperature in °C), At room temperature (25 °C), the thermal voltage is about 25.7 mV, n is an empirical constant between 0.5 and 2. The empirical constant, n, is a number that can vary according to the voltage and current ...
Figure:6. The output DC voltage of a half wave rectifier can be calculated with the following two ideal equations. Vpeak = Vrms ×√2. Vdc = Vpeak Π. Half Wave Rectification:For Positive Half Cycle. Figure:1. Diode is forward biased, acts as a short circuit, passes the waveform through. VI −Vb − I ×rd − I × R = 0.
About the Virtual Laboratory. Engineering Education is incomplete without hands on learning of real systems. IIT Kharagpur having a very strong base in Theory of Engineering Systems has developed a large amount of lecture material which is disseminated through the National Programme on Technology Enhanced Learning (NPTEL) in the form of Video ...
Mechanisms are used in variety of fixed motion generation applications in Engineering, where as Robots are used in applications where programmable motion is required. This Laboratory provides a primary exposure to design and control of such motion control applications in various applications.
Zener Diode - Load Regulation. Zener Characteristics. The circuit shown uses a 9.0V zener diode. If the load resistance is equal to 1.5 kΩ, and the DC source equals 24V, find the maximum value of resistor required to maintain a constant voltage of 9V across the load.
