Search results
The Bitrex® Qualitative Fit Test Kit meets the performance criteria for fit testing half mask respiratory protecting devices under current OSHA standards and DIN ISO 16795-3.
- 4055625 Bitrex Fit Test - Dräger
The sensitivity test solution is a diluted mixture of fit...
- 4055625 Bitrex Fit Test - Dräger
Solution used in qualitative fit testing. Test kits and accessories designed to help your organization meet OSHA fit testing requirements for respirators. The products can be used to check face to respirator seal on any particulate respirator or gas/vapor respirator with a particulate prefilter.
Bitter Qualitative Fit Test Kit. Features. Kit includes everything needed to perform fit testing on all Moldex ® respirators. Comply with OSHA standards for qualitative fit testing. Includes Bitter aerosol, fit test hood, instructions and certificates. Respirators sold separately. Qualitative Fit Test Training:
- Ingredients
- Items Needed
- Preparation
Denatonium Benzoate (CAS No. 3734-33-6) is commercially available generally in 5-15g packaging.Distilled water (CAS No.7732‒18‒5) is commercially available generally in 1L bottles.Sodium Chloride (CAS No. 7647-14-5) is commercially available generally in 500g packaging.One 500mL glass containerTwo 200mL glass containers with lidsTransfer pipette or a 100mL syringeScale (capable of measuring milligrams)Preparation of 5% NaCl Solution 1. In container 1 (the 500mL container), add 17.51g of NaCl to 350 mL of distilled water and stir well ensuring that all salts are dissolved. This solution is used as an intermediate solution for the preparation of the final fit test solution and the final threshold check solution. Preparation of Fit Test Solution 1....
The sensitivity test solution is a diluted mixture of fit test solution. The test subject should not eat, drink, or chew gum for at least 15 minutes before the test. 1)
Our VeriFit® Qualitative Fit Test Kit is designed to meet current OSHA requirements for fit testing N95 respirators as well as other tight-fitting face respirators. II. KIT CONTENTS • Bitrex Sensitivity Solution (6 pack) • Bitrex Fit Test Solution (6 pack) • Sensitivity Test Nebulizer • Fit Test Nebulizer • Test Hood • Scissors
3. Using the nebulizer labeled BITREX Fit Test Solution, inject the fit test aerosol into the hood. The same number of squeezes is required as was necessary to elicit a response in the threshold sensitivity screening test, i.e., 10, 20 or 30 squeezes. 4. To maintain an adequate concentration of aerosol during the test, one
