Search results
- The guide is a list of recommended configurations organized in sections: General, Network, Radio Frequency (RF), Security settings and more. When available, these settings are shown using the new graphical user interface (GUI) of the Catalyst 9800, as it has been greatly improved and should be easy to navigate.
www.cisco.com/c/en/us/td/docs/wireless/controller/9800/technical-reference/c9800-best-practices.html
People also ask
What is a Cisco Catalyst 9800 series wireless controller RF Group?
Can catalyst 9800 wireless LAN controller be managed simultaneously?
How do I configure catalyst 9800?
Does Cisco Catalyst 9800 embedded wireless controller use a loopback interface?
- Introduction
- Prerequisites
- Configurations
- Policy Tag Assignation
- FAQs
This document describes the new configuration model of tags and profiles that is available on Catalyst 9800 Series Wireless Controllers.
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on these software and hardware versions: 1. Cisco Catalyst 9800 Wireless Controllers running Cisco IOS® XE, Gilbraltar v16.10 The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any command.
Network Diagram
This document is based on this topology:
Declare Client VLANs
Before you start any configuration, you need to add the needed VLANs (VLANs where the wireless clients are assigned). Step 1. Navigate to Configuration > Layer2 > VLAN > VLAN > + Add. Step 2. Enter the needed information. Repeat steps 1 and 2 for all the needed VLANs. Once done, you can continue to step 3. Step 3. Verify the VLANs are allowed in your data interfaces. If you are using port channels, navigate to Configuration > Interface > Logical > PortChannel name > General. If you see it con...
Wizard Based Configuration - Recommended for New 9800 WLC Deployments
For Catalyst 9800 WLCs installation, you can use configuration wizards made available to guide you through the configuration process. If you need to use RADIUS servers on your deployment, you can use the AAA Wizard first and then choose between the Basic or Advanced Wireless Setup. If you do not use RADIUS servers on your deployment, you can go directly to either Basic or Advanced Wireless Setup.
Menu Based Configuration - Recommended for Established 9800 WLCs Deployment
Instead of a wizard, select which specific elements need to be created or modified. Visual representation of configuration elements.
You can assign a Policy Tag directly to an AP or assign the same Policy Tag to a group of APs at the same time. Choose the one that fits you.
1. Can I use the same Policy Profile for different SSIDs? R= Yes 2. Can I use the same SSID on different Policy Tags? R= Yes 3. Can I use the same Policy Profile on different Policy Tags? R= Yes 4. What is maximum number of SSIDs that can be inside a Policy Tag? R= 16 5. Do I need to modify the three tags on the AP? R= No, you could create one new ...
Mar 14, 2019 · Separate RF groups exist for 2.4-GHz and 5-GHz networks. Clustering Cisco Catalyst 9800 Series Wireless Controller into a single RF group enables the RRM algorithms to scale beyond the capabilities of a single Cisco Catalyst 9800 Series Wireless Controller. An RF group is created based on the following parameters:
This video will show the steps to configure an out-of-the-box Catalyst 9800 controller ensuring best practices are placed. Tags: 9800, configuration, best practices, initial configuration.
- 5 min
This guide presents general RF concepts for high-density as well as implementation details. Many of the radio concepts in this guide apply to all high-density networks, including Cisco Meraki. However, implementation details and configurations are focused on Catalyst Wireless using the Catalyst 9800
Oct 30, 2020 · If RF profiles are repurposed from one site to the next, a configuration change to either the 2.4 or 5GHz profile will affect both locations. If you aren’t familiar with the settings located within RF profiles, they include channel selection, transmit power, data rates, channel bonding, and many others.
Nov 13, 2018 · Cisco Catalyst 9800 Series Wireless Controller Software Configuration Guide, Cisco IOS XE Dublin 17.10.x Programmability Configuration Guide, Cisco IOS XE Dublin 17.10.x 30-Nov-2022 View all documentation of this type